Yeti Pro pH-neutral snow foam bottle
Yeti Pro snow foam clinging to the front of a car
Yeti Pro pH-neutral snow foam 5L

YETI PRO | SNOW FOAM (PH NEUTRAL)

£17.95
  • Thick clinging foam for maximum dwell time
  • Lifts dirt safely before contact wash
  • pH neutral - safe for regular use

Size: 1L

Add £50.00 more for free UK delivery

UK Formulated
Free delivery over £50
FTB Guarantee
Description

Yeti Pro is a pH-neutral snow foam that softens and lifts dirt, grit and road grime before you touch the paint. Its thick, clinging foam gives it time to work, so more dirt rinses away and less gets dragged around by your wash mitt. That means fewer swirl marks.

Because it's pH neutral, Yeti Pro is wax and LSP safe, and safe on ceramic coatings, wraps and PPF. Use it every wash without stripping the protection you've worked for.

Where it fits: spray Cyclops Pro citrus pre-wash on the dirtiest lower panels, cover the car in Yeti Pro with a foam lance such as the JAWS Big Mouth, rinse, then hand wash with Ogre pH-neutral shampoo. Not sure you need both pre-wash stages? Read citrus pre-wash vs snow foam.

Available in 1L and 5L. The 5L works out much cheaper per litre for regular washers and detailers.

Mixing and lance setup explained: snow foam dilution ratio and foam lance setup.

Guarantee

Every Feed The Beast product is built to do the job properly. If something arrives damaged or there's an issue with your order, contact us and we'll sort it.

Delivery

Delivery is FREE over any order over £50.

Dispatch is 1-2 working days from our UK warehouse.

Delivery is expected between 2-4 days from dispatch.

Simple

How To Use

Prep

Prep

For best results, add to a foam lance at around 1:5 dilution with water.

Apply

Apply

Cover the vehicle fully using a foam lance, working from bottom to top.

Dwell

Dwell

Allow to sit for 5-10 minutes. Do not let it dry.

Rinse

Rinse

Rinse thoroughly with a pressure washer.

Why It Works

pH Neutral

Safe on all paint types including wraps and PPF.

UK Formulated

Developed and manufactured in the UK.

Professional Grade

Built to perform beyond consumer products.

FTB Approved

Part of the Feed The Beast detailing system.

What Customers Say

4.95 ★ (63)
Verified

Got Questions

FAQ

Do I need a pressure washer to use Yeti Pro?

A foam lance on a pressure washer, like our JAWS Big Mouth, gives the thickest foam. You can also apply it with a pump sprayer that has a foaming nozzle. The foam is wetter, but it still does the pre-wash job. Our guide explains how: Can you snow foam without a pressure washer?

Is Yeti Pro safe on ceramic coatings and wax?

Yes. The pH-neutral formula is safe on coated, waxed and sealed cars, and on wraps and PPF, so you can use it every wash.

What dilution should I use?

For best results, mix it at around 1:5 with water in your foam lance bottle. Use our snow foam dilution calculator to work out the exact amounts for your bottle.

How long should I leave the snow foam on?

Leave it for 5 to 10 minutes, then rinse thoroughly. Don't let it dry on the paint: in sun or wind, rinse sooner.

Do I need a citrus pre-wash as well?

On a lightly dirty car, Yeti Pro on its own is usually enough. On a very dirty car, such as one covered in winter road grime, spray Cyclops Pro on the lower panels first, then foam over the top. Citrus pre-wash vs snow foam explains the order.

Can beginners use this?

Absolutely. It's designed to be effective without being complicated: foam, wait, rinse.